Thomson THS813 Installation Guide download pdf (Page 6)

1. INTRODUCTION

1.0 1. INTRODUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface

which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

• To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to intense

vibration and to any shock which may cause permanent damage to your receiver or to any magnetic

objects, such as loudspeakers, transformers, etc.

• Do not use a damaged power cord. It may cause a fire or an electric shock. Do not touch a power cord with

wet hands. It may cause an electric shock.

• When the receiver is not used for a long period of time, you should unplug the power cord from the wall

socket.

• Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver

wit h a soft lint-free cloth slightly made damp with a mild soap solution, and only after disconnecting from

the mains voltage supply. Make sure no foreign objects fall through the ventilation slots because this could

cause fire or an electric shock.

• Do not place any objects on top of the receiver because this might prevent proper cooling of the

components inside.

Safety Precautions

• Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high voltages

and possible electrical hazards. Opening the receiver will void the warranty of the product. Refer all

maintenance or servicing to suitably qualified personnel.

• When you are connecting cables, be sure that the receiver is disconnected from the mains supply voltage.

Wait a few seconds after switching off the receiver before you move the receiver or disconnect any

equipment.

• It is a necessity that you only use an approved extension and compatible wiring that is suitable for the

electrical power consumption of the installed equipment. Please ensure that the electrical power supply

corresponds with the voltage on the electrical identification plate at the back of the receiver.

If the receiver does not operate normally, even after strictly following the instructions in the user manual

available on our website www.thomsonstb.net/downloads/manuals/THS813_UM_EN.pdfis recommended

to consult your dealer or the appropriate service for your country.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against

electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep the

packaging away from children. When transporting the receiver from one place to another or if you are

returning it under warranty conditions, make sure to repack the receiver in its original packaging with its

accessories. Failing to comply with such packaging procedures could damage the product and void your

warranty.

1.3 Equipment Set-up

We recommend you to consult a professional installer to set up your equipment. Otherwise, please follow

the instructions below:

• Refer to the user manual of your TV and your antenna.

• Make sure that the SCART/HDMI cable and outdoor components are in a good condition and the SCART/

HDMI connections are well shielded and from good quality.

The user manual available on our website www.thomsonstb.net/downloads/manuals/THS813_UM_EN.pdf

provides complete instructions for installing and using this receiver. The following symbols will serve as

follows.

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Comments to this Manuals

No comments

Thomson THS813 Installation Guide Page 6

Comments to this Manuals

Related products and manuals for TV set-top boxes Thomson THS813