Thomson THS813 Installation Guide download pdf (Page 20)

P20

7. MAIN MENU

Update and OTA Software Update. Choose a sub menu with pq and press OK to advance. For Backup to

USB device and Load Backup from USB device these functions will be executed by pressing OK directly.

7.2.1 Receiver Information

In this submenu you can find information about the software and hardware version of your receiver. A

customer support agent might ask for the information given in this screen. Press

to return to the menu.

7.2.2 Backup to USB device

In the Update & Info menu select Backup to USB device with pq and press OK to execute a current backup

of your channels, transponders and user settings. When the message Please wait... disappears the receiver

has successfully created the “userdata.bin” file to the root directory of your USB device which you can save

if you need to reset the receiver and easily want to load this backup into the receiver.

7.2.3 Load Backup from USB device

In the Update & Info menu select Load Backup from USB device with pq and press OK to execute loading

the “userdata.bin” file into the receiver. You will only be able to load this kind of file into the receiver so

please don’t rename it, or alternatively rename it again to the above mentioned file name before you load

the file to the receiver again.

7.2.4 USB Update

This function allows you to perform a software update with a USB storage device.

Download the software and update instructions from our website www.thomsonstb.net and unzip it on

your PC. Then load the file to the root directory of your correctly formatted USB storage device and connect

it to your receiver. Turn on the receiver and wait until the USB device is successfully detected.

Press OK in the menu USB Update and confirm the displayed message, then wait until the software update

and loading process begins. After the loading process has been started successfully (a progress banner

is displayed) you can disconnect the USB storage device (or wait until the update is fully loaded)! Please

disconnect the USB device after a successful update in order to restart the receiver!

WARNING: NEVER disconnect the receiver from the mains or switch the power OFF during the update

procedure. It can damage your receiver and warranty will void! In case of an USB software

update please consider that the receiver may delete all channels, data and user settings in

certain cases. You can backup your data at any time, see chapter 7.2.2 Backup to USB

device.

NOTE: The above mentioned USB functions require a correctly formatted USB storage device to be

connected to the receiver.

7.2.5 OTA Software Update

The OTA (Over the Air) function allows you to search for software updates available on satellite. Please ask

your local THOMSON dealer or visit our website www.thomsonstb.net for information.

After pressing OK on OTA Software Update to execute your receiver will start looking for new software.

Follow all instructions that are displayed on screen. If an update is available choose Download with pq

and press OK to start the update process.

WARNING: After the update the receiver restarts automatically! During the update process NEVER

disconnect the receiver from the mains, switch power OFF or disconnect the receiver from the

antenna cable! This can damage your receiver and warranty will be void! In case of an OTA

update please consider that the receiver in certain cases may delete all channels, data and user

settings. You can backup your data at any time, see chapter 7.2.2 Backup to USB device.

7.3 Conditional Access

Your receiver is equipped with a smart card slot which allows access to Irdeto encrypted services.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Comments to this Manuals

No comments

Thomson THS813 Installation Guide Page 20

Comments to this Manuals

Related products and manuals for TV set-top boxes Thomson THS813